Sanyo Flat Panel Television DP15657 User Guide

CONNECTING A VCR OR DVD TO THE DTV  
VIDEO1 (ANALOG) JACKS  
DTV AV Input Jacks  
ENGLISH  
AS  
Connect  
Yellow, White, and Red AV jacks.  
a
Composite cable to the VIDEO1  
1
2
LCD Owner’s Manual  
OPTIONAL  
Model Nos.  
Part No.:  
1JC6P1P0291 – –  
Connect DVD to the TV S-Video In Jack, if avail-  
able on your external equipment.  
2
S-Video  
Jack  
DP15657  
DP19657  
Note: S-Video jack connection overrides Video jack  
connection (VIDEO1).  
Please call us at  
(Optional)  
1.800.877.5032 if you need  
assistance with your new HDTV.  
We can Help!  
Press INPUT to select Video1 to view the VCR or  
DVD program.  
1
3
Composite  
AV  
IMPORTANT FACTS:  
Remote Control  
for more information about these models.  
Jack  
Don’t be fooled by the phrase  
“Available in High-Definition.”  
Composite jacks offer only 480i  
(SDTV) resolution.  
To view available High-Definition  
(HD) programs, you must connect  
your HD equipment to the  
Component jacks.  
FIRST-THINGS-FIRST (REQUIRED INITIAL SETUP)  
3
Install batteries in remote control (2AA, not included)  
1
PRECAUTIONS  
To ensure safe operation, please observe the following  
precautions:  
CONNECTING A MULTICHAN-  
NEL RECEIVER TO THE DTV  
CONNECTING A STEREO  
AMPLIFIER TO THE DTV  
Replace both batteries at the same time. Do not use a new  
battery with a used battery.  
Risk of explosion, if battery is replaced by an incorrect type.  
Do not expose the Remote Control Unit to moisture or heat.  
DIGITAL AUDIO OUT JACK  
AUDIO OUT (ANALOG) JACKS  
Connect a Multichannel Receiver to the TV Digital  
Audio Output as shown.  
Connect  
Audio Out jacks as shown.  
a
Stereo Amplifier to the TV  
Connect Signal to the TV’s Integrated Analog / Digital  
75 ohm Antenna Input terminal  
1
1
2
®
Note: Dolby Digital 5.1 audio is available at the Digital  
Audio Output only when received as part of a  
Digital Antenna signal.  
Note: Do not connect external speakers  
RF ANTENNA  
directly to the DTV.  
The Tuner in this DTV can receive:  
1. Digital and /or Analog Off-Air  
Signals from an RF antenna.  
OR  
Multichannel Receiver  
CABLE  
OR  
Back View of TV  
2. Analog or ClearQAM cable chan-  
nels.  
1
OR  
Note: You must search for ClearQAM  
channels using the Digital  
1
Cable Search” menu option.  
Back View of TV  
OR  
Analog/Digital  
Antenna In  
Coaxial Cable  
3. The output from a VCR or cable  
box.  
CABLE BOX or SATELLITE BOX  
Stereo  
Amplifier  
Digital signals from a Set-Top Box  
(STB) should be received through  
the Component In jacks.  
Plug in AC power cord (120V AC, 60 Hz.)  
3
4
5
This DTV can receive ANY unscram-  
bled RF signal being broadcast.  
Press the POWER key.  
(Follow on-screen instructions)  
Initial on-screen  
ALL Channel Search  
Perform “All Channel Search.” The All Channel  
Search will search for off-air digital and analog  
channels, and analog cable channels. The DTV will  
receive cable or off-air channels, but not at the  
same time. If after two searches the DTV still fails  
to detect any channels, the DTV will tune to  
Video1.  
If you experience  
problems, please call  
REMOTE CONTROL OPERATION  
1-800-877-5032,  
Point  
towards TV  
We Can Help!  
Note: If EXIT is pressed,  
the DTV will skip Channel  
Search and tune to Video1  
without storing any chan-  
nels in the Channel Map  
database.  
ALL Channel Search [Analog & Digital]  
Enter Key—Press to select an option from the  
menu system, when required.  
Exit Key—Press to exit from the menu system.  
Œ


PIX Shape Key—Use to change the video display  
format. Available options depend on signal  
received and the broadcast’s aspect ratio. Note:  
Cannot display picture on a full screen. Check  
Aspect Ratio of broadcast. Then press PIX Shape  
key to change setting.  
«
Ž


Trademarks Information:  
Specifications  
Reset Key—Press this key twice to restore factory  
settings. The TV will automatically start Channel  
Search and clear all customized settings. Note:  
Channel scan memory database list of digital  
and analog channels will be replaced. If desired,  
personal settings can be made again using the  
menu options.  
Power Requirement: Source: AC 120V, 60Hz  
Power Consumption: DP15657: 40 watts  
DP19657: 50 watts  
Manufactured under license from Dolby Laboratories.  
“Dolby” is a trademark of Dolby Laboratories.  
11  
12  
13  
CONNECTING A DVD OR  
GAME TO THE DTV  
DVD Player or similar digital  
DTV  
device, such as a Satellite Receiver  
Audio Key—Press to select the desired audio  
mode (if available).  
14  
Y- Pb- Pr  
VIDEO 2 / 3 (COMPONENT VIDEO IN  
JACKS)  
Caption Key—Captioning is text information  
transmitted along with the picture and sound so  
it can be displayed on the TV screen.  
1 JCaocmksponent  
Press CAPTION to select mode options: Digital  
Connect a Component cable to the VIDEO2 / 3  
Green, Blue, and Red video jacks.  
CC1  
~
CC6, or Analog CC1  
~
CC4, OFF, or  
1
2
3
QuikCap. (QuikCap switches captions on and off  
with the Mute function.) Digital Captions can be  
changed using the menu settings.  
Connect an Audio Cable to the VIDEO2 / 3  
White and Red audio jacks.  
2
Input Key—Press to select the program source  
to watch: TV, Video 1, Video 2, or Video 3.  
Volume Keys—Press VOL – + to adjust.  
Œ
Audio L/R Jack  
Press INPUT to select Video2 or Video3 to  
view the program.  
Mute Key—Press once to mute the sound.  

Ž
Game console  
11 Recall Key—Press to switch between the last  
Note: VIDEO2 and VIDEO3 jacks have identical  
functions. Compatible video devices can be  
connected to either or both jacks.  
Number Keys—Press two keys to select a chan-  
nel. Example: Press 0 then 6 to select channel  
6. (See #13.)  
two channels selected.  
12 Sleep Key—Press this key then the “0” key to set  
the Sleep Off Timer. Time can be set in 30-minute  
increments up to 3 hours. Note:The Sleep Timer  
cancels when the TV is turned off or if a power failure  
occurs.  
Y- Pb- Pr  
Component  
Jacks  
Channel Scanning (CH L M ) Keys—Press to  
scan through the channels in memory.  


Menu Navigational Keys:  
1
OPERATING TIP:  
Menu—Press to display on-screen menu.  
Cursor L (up) M (down) keys—Press these  
keys to move the cursor up and down within  
the menu.  
1– – Key—For Analog Cable channels above 100,  
press this key, then press the other two numbers.  
13  
Remote Control  
You DO NOT need to tune the TV  
to Channel 3 or 4 to view DVD  
program.  
Info Key—Press to display the Digital and Analog  
Full Banner information. The banner contains the  
following: program title, station ID, program rat-  
ing, signal strength, channel number, tuner ID,  
and audio information.  
14  
2
Cursor < (left) > (right) keys—Press these keys  
to move the cursor left and right within the  
menu.  
Audio L/R  
Jack  
3
 

Quatech Network Card DSU 200 User Guide
Radio Shack Portable Speaker XTS 36 User Guide
RCA Camcorder CC6364 CC6374 User Guide
RCA DVR DVR10 User Guide
Remington Electric Shaver BHT 500 User Guide
Rosewill Computer Keyboard RK 7310 User Guide
RSA Lighting Indoor Furnishings ASIM1 User Guide
Samsung Home Theater System HT DM550 User Guide
Samsung Printer ML 1200 Series User Guide
Samsung Stereo System MAX VS530 User Guide